Menu
Your Cart

Stefan

Stefan or also known as 'short dart' or 'half length dart' within the Nerf community, is usually a 36mm variant of dart used by certain Nerf community. A standard Nerf dart is usually 7.2cm long in total, a stefan dart is usually only 3.6cm long in total. The reason of using a shorter dart is to reduce the drag due to the long foam of the dart, and to avoid fishtailing issue as the center mass of the dart is further back in a normal full length dart. Hence, stefan is often associated with high power blaster as they benefits more when paired with a higher FPS blaster. This is a normal misconception as we often seen 100-120FPS stefan blaster being used around in the field since they have a more stable flight path, they tends to be much more accurate that a normal length foam dart. Using a stefan blaster will usually requires a different magazine, and normal blaster usually unable to fire stefan dart without any modification. Few years back, the Nerf community are firing stefan dart using various kind of brass barrel based breech but nowadays, you can easily get high quality drop in stefan kit for your blaster and you are good to go.  

Monkee Mods Inner Barrel for Worker & Artifact Kit (25cm)
Out Of Stock
Brand: Monkee Mods
Tune your blaster with these inner barrel to increase your blaster efficiency and FPS output. Using a proper length of barrel will increase your blaster FPS as an optimum length of barrel will allow your blaster to hit it's peak performance. There are no best length of barrel as it depends on your b..
USD6.83
Brand: Worker
Upgrade your slingfire to fire stefans...
USD30.00
Brand: Worker
Plastic adapter to be used with Worker Longshot Stefan Kit and Longshot Stefan Kit with Scar Barrel.Works with both Blue(normal) and Orange(power) kits...
USD7.88
Brand: Worker
Plastic adapter to be used with Worker Gen.2 Prophecy/Retaliator Stefan kit.Works with both Blue(normal) and Orange(power) kits...
USD7.88
Stefan conversion kit for Rival Kronos blaster.Includes :- Breech replacement- Inner barrel replacement- Spare o-ringsNote*Irreversible shell modification required to use this kit. This kit is designed to work with Worker Talon Mags...
USD52.50 USD26.25
Brand: Worker
This version of longshot comes with a longer barrel with built in SCAR instead of the standard inner barrel.Comes with:- Worker Longshot Stefan pusher- Worker 27cm outer barrel- Worker Inner barrel with SCARChoice of front adapter(Sold separately)- Metal Worker Longshot Stefan Front Adapter- Plastic..
USD40.00 USD20.00
Brand: Worker
Comes with:- Worker Longshot Stefan Breech- Worker Longshot Inner barrel with sleevesChoice of front adapter(Sold separately)- Metal Worker Longshot Stefan Front Adapter- Plastic Worker Longshot Stefan Front AdapterNote***Please purchase the kit with a front adapter if you don't already own one..
USD36.75 USD18.38
Brand: Worker
Injection molded rifling muzzle..
USD7.35
This is a 36mm stefan magazine. Not for FULL LENGTH..
USD7.35
MonkeeMods Rifling Muzzle (0.5R) MonkeeMods Rifling Muzzle (0.5R)
Out Of Stock
Brand: Monkee Mods
Replacing our 3D printed SCAR muzzle will be our all new rifling muzzle, designed by Blasterforge. Instead of using string, the rifling muzzle uses 3 lines of rifling twist to guide the dart into a spin. This design allow us to produce more consistent product that doesn't subject to human error, red..
USD5.25
Showing 13 to 22 of 22 (2 Pages)