Warning: file_get_contents(http://www.geoplugin.net/json.gp?ip=3.219.167.163): failed to open stream: HTTP request failed! HTTP/1.1 429 Too Many Requests in /var/www/monkeemods-wbb/vqmod/vqcache/vq2-system_storage_modification_catalog_controller_startup_startup.php on line 181
Monkee Mods : Monkee Mods Aluminium Inner Barrel for Worker ...
Menu
Your Cart

Monkee Mods Aluminium Inner Barrel for Worker & Artifact Kit (30cm)

Monkee Mods Aluminium Inner Barrel for Worker & Artifact Kit (30cm)
  • Stock: In Stock
  • Model: Monkee Mods Inner Barrel for Worker & Artifact Kit (30cm)
  • Weight: 0.10kg
USD7.88

Available Options

Tune your blaster with these inner barrel to increase your blaster efficiency and FPS output. Using a proper length of barrel will increase your blaster FPS as an optimum length of barrel will allow your blaster to hit it's peak performance. There are no best length of barrel as it depends on your blaster configuration such as your spring load, the kits you are using and the seal of your blaster. All of these variables play a role in determine which barrel to use. What work for others might not work for you so you will have to trial and error and pick the optimum barrel for your blaster.


30cm barrel offers a slightly longer barrel than those stock Worker(25cm)/Artifact(27cm) ones. Would recommend this for a lower spring load such as 9-12KG on a longshot. These are just estimation as it varies from blaster to blaster.


This barrel is compatible with these stefan kits:

- Worker Longshot Stefan Kit

- Worker Prophecy/Ret Orange Power Stefan Kit

- Worker Prophecy/Ret Blue Stefan Kit

- Artifact Longshot Hunter Kit

- Artifact EAT Stormer Kit

- Artifact Ret Punisher Kit



Inner Barrel Specification

Length: 30cm / 300mm

Inner Diameter: 13mm

Outer Diameter: 16mm

Breech Diameter (Widest) : 13.8mm

Write a review

Note: HTML is not translated!
Bad Good