MM Firefly Fully Assembled Blaster V2.5

Monkee Mods Firefly Fully Assembled Blaster V2.5

The unit has the 5kg spring installed in the receiver unit, while having the 12 kg spring inside .

This unit has the receiver unit and front end assembly built. The blaster will be split into two parts for shipping purpose. To put the 2 section together, pry the front of the blaster just a little bit to allow the front end assembly to slide in. You will see there are 2 nubs that will guide the assembly into the right place. After that simply tighten the receiver with the screws provided. Install the priming bar and you are good to go!

UPDATE!!(20/10/2023): Now Transparent with orange classical internal is available in pre-assemble version.

UPDATE!! (13/7/2022): The Firefly Unit is now updated to V2.5 showcasing the new threaded breech adapter with the threaded barrel and magazine tube set. Giving the Firefly Blaster with a better air seal and removing the Shell extraction problem. The main receiver screws have changed from a short Philips head screw to a longer hex head screws.

UPDATE!! (7/4/2022): The Firefly units now comes with the Shock padding for the plunger rod built in.

Kindly follow the barrel fitment guide based on the video below starting at video timer of 6.27.

Colour: Orange with Black parts ONLY (UPDATE 7/4/2022): The white receiver units are also available

UPDATE: Please be informed that from November 2024 onwards, the Monkee Mods Firefly Fully Assembled Blaster V2.5 will be partially disassembled into a smaller box for ease of international shipping.

Please refer to the picture for the updated packaging. Please refer to the guide for reassembling the blaster. If you need help with assembling the blaster, please do not hesitate to contact us.