-250x250w.jpg "Adjustable Metal Frame Shell Catcher")
-20 %
Brand: No Manufacturer
This handy shell catcher can be mounted on the blaster with picatinny holder and able to adjust the position with metal frame of the shell catcher.Easy installation, easy to use as well. Instead removing the whole shell catcher with the mount together while need to remove the shell in the netting, n..
RM50.00 RM39.99
-10 %
Out Of Stock
Brand: Monkee Mods
High powered spring for your Phantom Tech Kirin Type-A blaster. A 2.2 Spring that increase your blaster performance.FPS Chart (*Fresh Darts are used on this test)SetupsFPSWorker Gen 2 HE Bamboo Darts235-245+Worker Stefan Gen 3 Darts240-250+Dragon Jr 255-260+QWK EPP280-290+Worker Gen 2 HE B..
RM21.00 RM18.90
-10 %
Brand: Phantom Tech
This a 46cm(not include the threaded part) extended barrel for your Kirin blaster.You are able to use the shroud and and a scar muzzle with this extended barrel. Length: 46cm without threaded part. 49.5cm with threaded part include.Colour: Titanium colour only. ..
RM47.00 RM42.30
-10 %
Brand: Phantom Tech
More Shells More Fun!!!!Get a pack of 7 Flypoint shell for your Kirin blaster.Available in Orange Colour..
RM17.00 RM15.30
![[DEFECT] Phantom Tech Kirin Type-A](https://www.monkeemods.com/nerf/image/cache/catalog/Blaster/Kirin%20Blaster/P_20230302_152010-250x250w.jpg "[DEFECT] Phantom Tech Kirin Type-A")
![[DEFECT] Phantom Tech Kirin Type-A](https://www.monkeemods.com/nerf/image/cache/catalog/Blaster/Kirin%20Blaster/P_20230302_174228-250x250w.jpg "[DEFECT] Phantom Tech Kirin Type-A")
-63 %
Brand: Phantom Tech
Please be noted that these Kirin units are defective. Mainly the FPS output is lesser than the expected standard.The problems ranged from, substandard springs, possible air seal issues due to O-rings at the breech/piston.PLEASE BE INFORMED THAT THESE UNITS ARE NOT REFUNDABLE/EXCHANGEABLE/RETURNABLE...
RM680.00 RM249.99
Showing 1 to 5 of 5 (1 Pages)