Menu
Your Cart

Nerf Stryfe

The Stryfe is a small, clip-fed, semi-automatic flywheel blaster. It features a small acceleration trigger which allows for the blaster to be powered up for firing. It also has two tactical rails, a small one below the muzzle and a long one at the top rear of the blaster. There are barrel extension and shoulder stock attachment points as well. The clip release button is located in front of the firing trigger.

The muzzle has a counter-clockwise rifled texture, similar to the Retaliator's barrel extension. Opening the top jam door slows the flywheel faster than normal; this appears to be a safety mechanism and works even if power is lost before the flywheel stops spinning.

Source: http://nerf.wikia.com/wiki/Stryfe

Add second stage flywheel cage setup for your stryfe.Comes with XT60 connector and wiring..
USD32.50
Brand: Worker
Full auto pusher + return spring for Worker Stryfe/Dominator full auto pusher..
USD3.00
Worker Flywheel Hybrid Dart Pusher bundle with Talon AdapterAllows your flywheel blaster to shoot both full-length and half-length darts.The adapter can only fit Worker Talon Stefan mag and curved mag...
USD8.50
Worker Transparent Oblique Flywheel Cage (42.5-Mid Crush)
Out Of Stock
Brand: Worker
Worker's injected molded flywheel cage with a crush of 42.5mm.The mid crush gives a bit of squeeze on the dart allowing it to have a higher power and travel distance coming out of the blaster. This will cause some wear and tear on your darts, recommended to use soft head tip darts (e.g. Work..
USD8.50
Brand: Worker
Worker Flywheel in transparent nylon material. Slanted to give more spin in the dart for longer dart travel distance...
USD6.00
Brand: Worker
Worker's injected molded flywheel cage with a crush of 43.5mm. The standard crush gives a slight squeeze on the dart allowing it to have a higher power and travel distance coming out of the blaster. This will cause some wear and tear on your darts, recommended using soft head tip darts (e.g. W..
USD8.50
XSW Stryfe XMD-1 Bullpup Kit XSW Stryfe XMD-1 Bullpup Kit
Out Of Stock
Brand: XSW
Convert your Stryfe into a bullpup with this XSW XMD-1 Bullpup kit. Comes with wiring and auto kit so you can wire your new bullpup Stryfe to rain darts on your target! Include: - XSW XMD-1 Body Kit and buttstock- XSW XMD-1 Full Auto KitDoes not include:- Any Muzzle- Any blaster- Wirings e..
USD110.00
Brand: Worker
This is for Stryfe only. If you want Swordfish version, please purchase that instead...
USD25.00
Comes with:- F10555 Stryfe Lighting Kit assembly with Top handle- Side patch and 2x 5cm railDoes NOT include:- Any muzzle- Blaster- Any buttstock..
USD55.00
Brand: Worker
Worker Metal trigger for Nerf Stryfe.Now feel the weight of every trigger pull...
USD12.00
Includes:- F10555 TS main assembly              -       Modular front adapter-       Top cover with iron sight-       Side cover with 5cm side ra..
USD78.00
Showing 1 to 12 of 47 (4 Pages)