Monkee Mods

If you are looking for an easier to prime spring than the usual 12KG spring, get this instead. Lose 20FPS and instead it will make the blaster much easier to prime!Spring Rate: 10KGExpected FPS in Firefly: 170-180FPS (Tested with Worker Gen 3 Dart)..

The screw set for Firefly. The receiver screws are now made of stainless steel for better durability.UPDATE (13/7/2022): The main receiver screws have been changed from the short Phillips head screws to the longer Hex head screws.UPDATE (14/7/2022): Some of the screw packs will have a mix of th..

The stock replacement plunger tube for Firefly. Made of aluminium...

The stock replacement breech gasket for Firefly. A key component to ensure proper seal to the blaster shell. Blaster will malfunction without this piece...

The stock replacement priming bar for Firefly. Made of steel!..

The stock replacement catch spring for the Firefly. If you lost it somehow, you can grab it here!..

The stock replacement extractor spring for Firefly. If yours somehow went missing, you can grab it here!..

The stock replacement shell lifter spring for Firefly. If you somehow lost it, you can grab it here!..

The stock magazine tube spring for Firefly. If you somehow damaged or lost it, you can grab it here..

A low FPS spring for you to operate your Firefly blaster!Spring Rate: 5KGExpected FPS in Firefly: 80FPS (Tested with Worker Gen 3 Dart)..

This tougher spring that is bundled with Monkee Mods Firefly Blaster. Get it replaced when your spring is wearing out.Spring Rate: 12KGExpected FPS in Firefly: 200 FPS (Tested with Worker Gen 3 Dart)..