All Products

New and improved version of the Firefly Shell Holder.Picatinny rail design and new bottom base that is secured with adhesive on the body of the Firefly. Easily detachable from the blaster shell and will not interfere with disassembly of the blaster.Double side tape application is necessary.Colour: O..

ZWQ's New Talon Magazine has hit our shelves.This magazine can be used with other Worker blaster or other short foam dart blaster.The long magazine can fit in 13 darts. It is RECOMMENDED to load 12 darts in this magazine. Sporting a full transparent body allowing users to be able to keep track ..

ZWQ's New Talon Magazine has hit our shelves.This magazine can be used with other Worker blaster or other short foam dart blaster.The long magazine can fit in 20 darts. It is RECOMMENDED to load 19 darts in this magazine. Sporting a full transparent body allowing users to be able to keep track ..

The MM 3d printed Magwell flare for the AIT Toy Lightning blasters.The 3d printed magwell flare has a tight fitting around the magwell of the original Lightning blaster.Guides and easier loading of the magazine into the blaster.Colour: Black and Orange..

The New 3d printed MM Lightning "Ergo" Magazine Base Extender.This new Mag base extender follows the shape of the Lightning blaster's lower frame magazine well shape.It is tight friction fitting as to prevent the magazine base from slipping out the magazine.This version allows 5 more darts in your m..

The 3d printed MM Lightning Long magazine base extender +5Allowing your Lightning blaster magazine to load up to 15 darts.It is tight friction fitting to prevent the mag base from slipping out of the magazineCompatible with the MM Lightning 3d printed Magwell Flare.NOTE!!: The 3d printed Magwel..

The MM Lightning 3D printed Short Magazine base extender allows you to load up to 13 darts into the magazine.Tight friction fit on the magazine that prevents itself from slipping off.Usable with the MM Lightning Magwell flare.NOTE!!: Pictures of magwell flare used together with the mag base is ..

The New 3d printed MM Lightning "Ergo" Magazine Base Extender.This new Mag base extender follows the shape of the Lightning blaster's lower frame magazine well shape.It is tight friction fitting as to prevent the magazine base from slipping out the magazine.you will get 3 additional darts with this ..

A replica of the T1 red dot sight in sand colour. Comes with the LaRue style tall mount with quick detach.5 level of brightness intensity, with both green and red dots...

The 6 Bearing BCAR extension pieces. Works exclusively only to the new Worker 9 Bearing BCAR units ONLY.It comes with a set of 2 rubber washers to ensure all of the bearings are aligned properly.Follow the picture as shown below as reference to ensure all bearings on the BCAR and extensions are alig..