Brand: No Manufacturer
12 rounds proprietary magazine for the BK1/2s Blaster. It can fit approximately 13-14 darts if you remove the limiter within the magazine but please make sure to use a stiffer foam dart.Magazine can be disassembled easily to clean the follower, mag base can be removed, allowing the installation of c..
RM30.00
Brand: No Manufacturer
- 7.5inch handguard with mil-spec buffer tube and buttstock- Uses proprietary magazine- Powered by T238 MOSFET (similar to reversed scale/LN01)- Jam detection- Semi(Single/Double shot configuration) and Full AutoFPS: 170-180FPS (Using Zius Bamboo Dart)Battery Connector: XT-30 (Recommended ..
RM600.00
![[Pre-order] Rifling Swin Alien](https://www.monkeemods.com/nerf/image/cache/catalog/Blaster/Swin%20Alien/DSC01237-250x250.JPG "[Pre-order] Rifling Swin Alien")
![[Pre-order] Rifling Swin Alien](https://www.monkeemods.com/nerf/image/cache/catalog/Blaster/Swin%20Alien/DSC01241-250x250.JPG "[Pre-order] Rifling Swin Alien")
Out Of Stock
Brand: Rifling Swin
UPDATE 28/7/2025: Pre-Orders are available for this blaster. Lead time is 30-45 days.*This item only open to OVERSEAS CUSTOMER (OUTSIDE MALAYSIA).Premium Grade, CNC Built, High PrecisionIntroducing a premium foam dart springer from Rifling Swin, Alien. A highly precise and fully CNC metal built with..
RM2,000.00
Brand: No Manufacturer
An all brand new innovation of flywheel blaster is ready to perform in your hands. Introducing the brand new brushless flywheel blaster, Diana. Manufactured by Hare Technology, an innovative change to put a brushless flywheel into a compact size blaster, with the measurement only of 207mm long..
RM840.00
Brand: Worker
UPDATE 3/9/2025: New Grey Seagull blaster is now releasedLooking for something small but not losing any performance? Introducing Worker Seagull a newest series line from Worker. Compare to Worker Harrier, Worker Seagull provide you a more compact size of blaster but still pack a punch perf..
RM520.00
![[DEFECT] Phantom Tech Kirin Type-A](https://www.monkeemods.com/nerf/image/cache/catalog/Blaster/Kirin%20Blaster/P_20230302_152010-250x250w.jpg "[DEFECT] Phantom Tech Kirin Type-A")
![[DEFECT] Phantom Tech Kirin Type-A](https://www.monkeemods.com/nerf/image/cache/catalog/Blaster/Kirin%20Blaster/P_20230302_151747-250x250w.jpg "[DEFECT] Phantom Tech Kirin Type-A")
Brand: Phantom Tech
Please be noted that these Kirin units are defective. Mainly the FPS output is lesser than the expected standard.The problems ranged from, substandard springs, possible air seal issues due to O-rings at the breech/piston.PLEASE BE INFORMED THAT THESE UNITS ARE NOT REFUNDABLE/EXCHANGEABLE/RETURNABLE...
RM680.00
-250x250w.jpg "Worker Harrier")
-250x250w.jpg "Worker Harrier")
Out Of Stock
Brand: Worker
A long anticipated Worker Harrier had arrived in Monkee Mods store.Worker Harrier a new blaster amazingly manufactured by Workers, easy 2 pieces installation, fast quick change threaded barrel and multiple configuration can be apply into this blaster. Do get one for yourself now!!!Worker Harrier in ..
RM650.00
-250x250w.jpg "Worker Nightingale")
-250x250w.jpg "Worker Nightingale")
Out Of Stock
Brand: Worker
You waited long enough for this blaster to arrive.The Worker Nightingale has arrive in our shop, featuring a single stage motor flywheel unit that allows itself to be used as a secondary unit blaster to your preferred primary unit.This unit comes with a holster(non-clip held by gravity), a proprieta..
RM240.00
Hot
Brand: Monkee Mods
After a long wait, the Firefly is now back with a much needed update. The new Firefly will fully manufactured by Monkee Mods and we are super excited to deliver this lovely shell ejecting shotgun to your hands. If you are looking for a 200FPS, shell ejecting high performance Nerf shotgun that f..
RM290.00
Hot
Brand: No Manufacturer
Do not add this to your cart unless instructed so. If you paid for this without prior discussion with our customer support, we will treat it as a donation to us. Thanks...
RM1.00
Showing 1 to 10 of 10 (1 Pages)