Tune your blaster with these inner barrel to increase your blaster efficiency and FPS output. Using a proper length of barrel will increase your blaster FPS as an optimum length of barrel will allow your blaster to hit it's peak performance. There are no best length of barrel as it depends on your blaster configuration such as your spring load, the kits you are using and the seal of your blaster. All of these variables play a role in determine which barrel to use. What work for others might not work for you so you will have to trial and error and pick the optimum barrel for your blaster.
45cm barrel is ideal for Longshot packing around higher spring load on a slightly bigger plunger tube such as the Worker plunger tube or a super high spring load on a stock(35mm) plunger tube.
Due to it's length, this item cannot be shipped with FREE or small item shipping.
This barrel is compatible with these stefan kits:
- Artifact Longshot Hunter Kit
- Artifact EAT Stormer Kit
- Artifact Ret Punisher Kit
This barrel will work with these stefan kits with some sanding:
- Worker Longshot Stefan Kit
- Worker Prophecy/Ret Orange Power Stefan Kit
- Worker Prophecy/Ret Blue Stefan Kit
Inner Barrel Specification
Length: 45cm / 450mm
Inner Diameter: 13mm
Outer Diameter: 16mm
Breech Diameter (Widest) : 13.8mm
- Stock: In Stock
- Model: Monkee Mods Inner Barrel for Worker & Artifact Kit (45cm)
- Weight: 0.50kg