You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Monkee Mods Aluminium Inner Barrel for Jet Alpha Kit (35cm)

  • Brand: Monkee Mods
  • Product Code: Monkee Mods Aluminium Inner Barrel for Jet Alpha Kit (35cm)
  • Availability: In Stock
Sold: 65
Views: 1031
USD10.00

Tune your blaster with these inner barrel to increase your blaster efficiency and FPS output. Using a proper length of barrel will increase your blaster FPS as an optimum length of barrel will allow your blaster to hit it's peak performance. There are no best length of barrel as it depends on your blaster configuration such as your spring load, the kits you are using and the seal of your blaster. All of these variables play a role in determine which barrel to use. What work for others might not work for you so you will have to trial and error and pick the optimum barrel for your blaster.


This inner barrel have a similar inner diameter as Artifact/Worker barrel (13mm) where it's much looser than Alpha kit 12.8mm inner diameter barrel. This also allows a wider range of dart fit while reducing jam issues.


35cm barrel offers a slightly longer barrel than Alpha kit stock 27cm barrel. This is a recommended length is you are an average spring load(14-16KG) as Alpha kit plunger tube have similar air volume to a stock tube.


This barrel is compatible with these stefan kits:

- Jet Longshot Alpha Kit 

- Jet Longshot Omega Kit (unconfirmed)

- Most Jet breech with the same screw threading as alpha kit


Inner Barrel Specification

Length: 35cm / 350mm

Inner Diameter: 13mm

Outer Diameter: 16mm


Overall Rating 0
Write a review
Please login or register to review